Shares of Aeron Composite Limited are expected to remain in focus after the company, in its H2 and FY26 investor presentation, highlighted the successful ramp-up of its new manufacturing facility and outlined plans to expand into advanced composite products.
The company manufactures a range of Fiber Reinforced Polymer (FRP) products used across telecom, infrastructure, utilities, renewable energy, oil and gas, and chemical industries.
New facility fully operational
According to the investor presentation, Aeron’s new manufacturing plant, spread over 51,671 square metres, is now fully operational.
The facility has enabled the company to increase production capacity to 22,000 MT, in line with earlier commitments.
Following the expansion, total installed capacity has reached 23,415 MT.
FY26 financial performance
During FY26, the company reported:
| Particulars | FY26 |
|---|---|
| Revenue | ₹221.8 crore |
| EBITDA | ₹18.8 crore |
| PAT | ₹8.7 crore |
Over the last five years, Aeron Composite recorded:
- Revenue CAGR of 23 percent
- PAT CAGR of 28 percent
Focus on GFRP rebar business
One of the company’s key growth areas is the GFRP Rebar segment under the Gigabar brand.
These products are used in:
- Roads
- Bridges
- Tunnels
- Marine structures
- Water treatment facilities
Compared with conventional steel rebars, GFRP rebars are:
- Corrosion resistant
- Lightweight
Commercial sales began in March 2025.
The company plans to increase the number of rebar production lines:
- Current lines: 2
- Target by FY27: 5
Entry into CFRP products planned
Aeron also intends to enter the Carbon Fiber Reinforced Polymer (CFRP) segment by the end of H1FY27.
The products are expected to cater to:
- Wind energy
- Railways
- Automotive
- Renewable energy
According to the company, CFRP products offer higher margins than conventional FRP products.
IPO funds earmarked for expansion
The company plans to use around ₹28 crore from IPO proceeds for:
- Rebar manufacturing machines
- Rebar bending lines
- CFRP facilities
- Rod manufacturing equipment
- Factory infrastructure expansion
Strong export presence
Exports accounted for 52 percent of FY26 revenue.
The company:
- Exports to more than 39 countries
- Serves over 800 customers
- Holds Two Star Export House status under India’s Foreign Trade Policy
Medium-term targets
Management has set the following targets for the next three years:
- Revenue CAGR of more than 15 percent
- EBITDA margin above 10 percent
The company expects growth to be supported by:
- Higher capacity utilization
- Automation
- New product additions
- Expansion in global markets
About the company
Incorporated in 2011, Aeron Composite manufactures:
- Cable trays
- Gratings
- Rods
- Poles
- Structural profiles
- Handrails
- Other advanced composite products
It caters to infrastructure, industrial, telecom and renewable energy sectors in India and overseas markets.
Key highlights
| Particulars | Details |
|---|---|
| New facility size | 51,671 sq. mtr. |
| Production capacity | 22,000 MT |
| Installed capacity | 23,415 MT |
| FY26 revenue | ₹221.8 crore |
| FY26 PAT | ₹8.7 crore |
| Export contribution | 52% |
| Countries served | 39+ |
| Global customers | 800+ |
TL;DR:
Aeron Composite has fully operationalized its new manufacturing facility, raising production capacity to 22,000 MT. The company is expanding its GFRP rebar business and plans to enter the higher-margin CFRP products segment by H1FY27.
AI summary:
- Aeron Composite ramped production capacity to 22,000 MT.
- Total installed capacity now stands at 23,415 MT.
- Commercial sales of GFRP rebars began in March 2025.
- The company plans to enter the CFRP segment by H1FY27.
- Exports contributed 52% of FY26 revenue.




